product description
 

This product is a one-component fluorescent self-drying paint, which is very convenient to use. Good insulation performance. It has good transparency, strong adhesion, fast curing speed, excellent weather resistance and excellent electrical properties. The PCB circuit board has the properties of anti-salt spray, moisture-proof, mildew-proof, weak acid and alkali, alcohol, and strong adhesion. Even if the coating layer is very thin, the coating paint can maintain its good effect. The conformal coating is widely used in the automotive industry, electronic industry, navigation, household appliances and so on. Completely different from the resin three-proofing agent, it does not absorb moisture under high temperature conditions, does not whiten, and has fast drying time, which can be dried naturally or dried.
 
 

Instructions
 

Brushing - Universal use and produces an excellent coating on smooth surfaces.
 

Spraying - The use of spray can type products can be easily applied to maintenance and small-scale production. The spray gun is suitable for large-scale production, but these two spraying methods require high accuracy of operation and may produce shadows ( The place where the lower part of the component is not covered with conformal paint).
 
Automatic dip coating - dip coating ensures complete film coverage without material waste due to overspray.
 
Selective coating—the coating is accurate and does not waste materials, it is suitable for large-scale film coating, but it has higher requirements on coating equipment.
 
 

Scope of application
 

Waterproof and moisture-proof, improve insulation strength. Isolate wires and cables, and isolate wire joints, screw contacts, switch boxes, etc. from contact with air. Used in TV sets to prevent corona caused by leakage of components such as high-voltage packages. It can also be used to protect soft objects such as maps, diagrams, documents, drawings, manuscripts, etc. Prevent atmospheric erosion of VHF antennas, TV antennas, radio antennas, etc. Protect marine communication equipment and electronic equipment from salt spray corrosion.
 
 

Product Features and Benefits
 
 

Resistant to moisture and salt spray. Prevent corrosion and prolong equipment life. Long-lasting protection. Long-lasting protection period for electrical appliances, equipment, parts, etc. High temperature resistance. The protective film starts to harden at 260°C and becomes sticky but does not drip by 300°C. The circuit board can be re-tinned. Construction methods can be brushing, spraying, dipping, showering and other methods.
 
 

Product performance characteristics
 

Film type Film dry in 1 hour Short term stable heat resistant temperature 300°C
Three-layer film thickness dielectric resistance 16kV Stable low temperature limit -50°C
The breakdown voltage is 80kV/mm The anti-rust life is more than two years
Creepage voltage 650kV Flash point: 25°C Boiling point: from 97°C
Long-term stable heat resistance temperature 200°C
 

technical parameter

Safety and Environmental Protection
 

This product is certified by the Quality Supervision Association.

After use, please dispose of the packaging in accordance with the relevant environmental protection regulations, and do not arbitrarily discard it.
 

Placed in a cool, ventilated, dry warehouse, no open flames, direct sunlight, primary color packaging storage period of 1 year.
 
 

Packaging, storage and transportation
 

Packaging is generally 1L, 3L, 20L iron drum packaging.

This product is stored unopened below 25°C, and the product has a shelf life of 12 months from the date of manufacture.

This series of products are Class III dangerous goods, which should be stored and transported in accordance with dangerous goods, avoid rain and sun exposure, and keep away from fire sources. When using, keep the construction site ventilated and avoid direct contact with the body.
 

Disclaimer: The technical data involved in this article are typical values, not as product acceptance criteria, for reference only. The above data are obtained under standard laboratory conditions and are considered to be reliable, but due to different working conditions used by users. It is normal that there are some changes in the actual performance data of the material surface state. Storage conditions, transportation and other factors will affect the stability and physical and mechanical properties of this product, and the results obtained by anyone using methods beyond our control. Sitong Chemical Technology is not responsible. It is suggested that customers should conduct experiments based on the data provided in this article before using them formally.