The candle making method is very simple, just find the corresponding mold, melt the candle, then sprinkle water on the mold to isolate the candle and the mold, then pour the candle into the mold to solidify the candle with water, and finally separate the mold from the candle. What is the mold of the candle? That is what is commonly called candle mold silicone.

The solution for craft candles without deformation:
1. Strengthen the physical strength of the mold through foreign objects. We can paste a few more layers of fiber cloth when brushing the mold, and increase it until the strength we need. In order to keep the mold from being deformed, we also need to make an outer mold for the mold. The method is to use gypsum to pour or use the method of painting to paste the FRP outer mold.

2. Use a silicone mold material with a relatively high hardness to make the mold. If the hardness is too small, the physical properties of the mold itself are not enough to support the mold to maintain its original shape, and the mold will inevitably deform.

Craft candle mold silicone deformation sometimes we can't control, but we can make the mold deformation within our allowable range. For example, we know in advance that the shrinkage rate of the silicone mold is 3%, we can take the shrinkage rate into account when making the master mold, and the mold can perfectly meet our expected standard after our predetermined shrinkage.

 There is no good or bad silica gel, only suitable and unsuitable. We have to use silica gel suitable for the hardness of the product to make the mold, so this situation will not occur. Purchase our Hongtu liquid silica gel, we can recommend suitable silica gel raw materials to you according to your product, and look forward to your understanding.